Panch Ratna Extrusion, we carry a full inventory of A106 Grade C Pipe roducts in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. A106 Grade C Carbon Steel Seamless Pipe Carbon Steel Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission.
We Supply A106 Grade C Carbon Steel Seamless Pipes in ASTM A106 Grade B, ASTM A106 Grade C, ASTM A53 Grade B, ASTM A333 Grade 3, ASTM A333 Grade 6, ASTM A334 Grade 1, ASTM A334 Grade 6, ASTM A179, ASTM A192, ASTM A210 A1, ASTM A210 C.The grade indicates the testing methods required for a given application. It is critical that structural grades of Carbon Steel Pipe not be used for Pressure or Fluid applications.
Panch Ratna Extrusion specializes in A106 GRade C Carbon Steel Pipes with years of Experience in Manufacturing A106 Grade C Pipe. we offer high quality, lower cost but the best service. As a result to that our A106 Grade C Pipes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.
A106 Grade C carbon steel seamless Pipes range
A106 Grade C Seamless Pipes Specification
ASTM A106 / ASTM A53 / ASTM A333 / ASTM A334 / ASTM A179 / ASTM A192 / ASTM A210
A106 Grade C Seamless Pipes Grades
ASTM A106 GRADE B, ASTM A106 GRADE C, ASTM A53 GRADE B, ASTM A333 GRADE 1, ASTM A333 GRADE 6, ASTM A333 GRADE A334 GRADE 1, ASTM A334 GRADE 6, ASTM A179, ASTM A192, ASTM A210
A106 Grade C Seamless Pipes Type
Seamless - Hot Rolled / Cold Drawn
A106 Grade C Seamless Pipes Outer Diameter Size
1/4" NB To 30" NB (Nominal Bore Size)
A106 Grade C Seamless Pipes Wall Thickness
Schedule 20 To Schedule XXS (Heavier On Request) Up to 250 mm Thickness
A106 Grade C Seamless Pipes Length
5 To 7 Meters, 09 To 13 Meters, Single Random Length, Double Random Length And Customize Size.
A106 Grade C Seamless Pipes Ends
Plain Ends / Beveled Ends / Coupling
A106 Grade C Seamless Pipes Delivery Conditions
As Rolled, Cold Drawn, Normalizing Rolled, Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T
A106 Grade C Seamless Pipes Coating
Epoxy Coating / Colour Paint Coating / 3LPE Coating.
A106 Grade C Seamless Pipes Other Testing
NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, PWHT etc.
A106 Grade C Seamless Pipes Dimension
All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API.
A106 Grade C Seamless Pipes Value Added Services
Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment
A106 Grade C Seamless Pipes Packaging
Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
A106 Grade C Seamless Pipes Shipment & Transportation
By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
A106 Grade C Seamless Pipes Material Test Certificate
Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC
astm a106 grade C seamless pipes
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ASTM A106 pipe (also covered in ASME specifications as S/A 106) is the standard specification for seamless carbon steel pipe for high-temperature service. Most common uses are in refineries and plants when gasses or fluids are transported at high temperatures and pressures. Federal Steel Supply is a world leader in the supply of A106 / SA 106 pipe and stocks a full range of grades B/C in a size rage of NPS 1/8" to NPS 48", with nominal (average) wall thickness as given in ANSI B36.10. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification*. Pipe ordered under this specification shall be suitable for bending, for flanging, for welding, and for similar forming operations. A full range of A106 stock is available in Schedules 10 through 160, STD, XS, XXS. Unscheduled wall thicknesses available up to 4 inches.
Panch Ratna Extrusion stocks a full range of A106 seamless carbon steel pipe.
A106 PIPE SPECIFICATIONS
NPS 1/4″- 30″
Schedules 10 through 160, STD, XH and XXH
ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. Suitable for bending, flanging and similar forming operations.
NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified.
Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.
Steel cast in ingots or strand cast is permissible.
Hot-finished pipe need not be heat treated.
Cold-drawn pipe shall be heat treated after the final cold draw pass.
Chemical Requirements FOR astm a106 grade C seamless pipes
|Grade A||Grade B||Grade C|
|Carbon max. %||0.25||0.30||0.35|
|*Manganese %||0.27 to 0.93||*0.29 to 1.06||0.29 to 1.06|
|Phosphorous, max. %||0.035||0.035||0.035|
|Sulfur, max. %||0.035||0.035||0.035|
|Chrome, max. %||0.40||0.40||0.40|
|Copper, max. %||0.40||0.40||0.40|
|Molybdenum, max. %||0.15||0.15||0.15|
|Nickel, max. %||0.40||0.40||0.40|
Total of Cr, Cu, Mo, Ni, and V shall not exceed 1%
Permissible Variations in Wall Thickness for astm a106 grade C pipes
The minimum wall thickness at any point shall not be more than 12.5% under the nominal wall thickness specified.
Permissible Variations in Weights per Foot for astm a106 grade C pipes
Weight of any length shall not vary more than 10% over and 3.5% under that specified. NOTE — NPS 4 and smaller — weighed in lots. Larger sizes shall be weighed separately by length.
Permissible Variations in Outside Diameter for astm a106 grade C pipes
Outside Diameter at any point shall not vary from standard specified more than:
|NPS [DN Designator]||Over||Under|
|1/8 to 1-1/2 [6 to 40], incl||1/64 (0.015)||0.4||1/64 (0.015)||0.4|
|Over 1-1/2 to 4 [40 to 100], incl||1/32 (0.031)||0.8||1/32 (0.031)||0.8|
|Over 4 to 8 [100 to 200], incl||1/16 (0.062)||1.6||1/32 (0.031)||0.8|
|Over 8 to 18 [200 to 450], incl||3/32 (0.093)||2.4||1/32 (0.031)||0.8|
|Over 18 to 26 [450 to 650], incl||1/8 (0.125)||3.2||1/32 (0.031)||0.8|
|Over 26 to 34 [650 to 859], incl||5/32 (0.156)||4.0||1/32 (0.031)||0.8|
|Over 34 to 48 [850 to 1200], incl||3/16 (0.187)||4.8||1/32 (0.031)||0.8|
Tensile Requirements for astm a106 grade C pipes
|Grade A||Grade B||Grade C|
|Tensile Strength, min., psi||48,000||60,000||70,000|
|Yield Strength, min., psi||30,000||35,000||40,000|
Number of Tests Required for astm a106 grade C pipes
|NPS||On One Length from Each Lot of|
|Tensile||5 and smaller||400 or less|
|6 and larger||200 or less|
|Bending||2 and smaller||400 or less|
|Flattening||2 through 5||400 or less|
|6 and over||200 or less|
Hydrostatic Testing for astm a106 grade C pipes
Inspection test pressures produce a stress in the pipe wall equal to 60% of specified minimum yield strength (SMYS) at room temperature. Maximum Pressures are not to exceed 2500 psi for NPS3 and must stay under 2800 psi for the larger sizes. Pressure is maintained for not less than 5 seconds.
Mechanical Tests Specified for astm a106 grade C pipes
Tensile Test — NPS 8 and larger — either transverse or longitudinal acceptable Smaller than NPS 8 — weighed in lots. Larger sizes — by length. Flattening Test — NPS 2-1/2 and larger. Bending Test (Cold) — NPS 2 and under.
|Degree of Bend||Diameter of Mandrel|
|For Normal A106 Uses||90||12 x nom dia. of pipe|
|For Close Coiling||180||8 x nom dia. of pipe|
Lengths for astm a106 grade C pipes
Lengths required shall be specified on order. No “jointers” permitted unless otherwise specified. If no definite lengths required, following practice applies: Single Random — 17′ ~ 24′ lengths Double Random — 36′ ~ 44′ lengths
Required Markings on Each Length for astm a106 grade C pipes
(On Tags attached to each Bundle in case of Bundled Pipe) Rolled, Stamped, or Stenciled (Mfrs. Option) Manufacturer’s name or brand. Length of pipe. A106 A, A 106 B, A 106 C. ANSI schedule number. Hydrostatic test pressures and/or NDE; Weight per foot (NPS 4 and larger) or NH if neither is specified. Additional “S” if tested supplementary requirements.
Referenced Documents for astm a106 grade C seamless pipes
S9. Requirements for Carbon Steel Pipe for Hydrofluoric Acid Alkylation Service
S9.1 Pipe shall be provided in the normalized heat-treated condition.
S9.2 The carbon equivalent (CE), based upon heat analysis, shall not exceed 0.43 % if the specified wall thickness is equal to or less than 1 in. [25.4 mm] or 0.45 % if the specified wall thickness is greater than 1 in. [25.4 mm].
S9.3 The carbon equivalent (CE) shall be determined using the following formula:
CE = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15S9.4 Based upon heat analysis in mass percent, the vanadium content shall not exceed 0.02 %, the niobium content shall not exceed 0.02 %, and the sum of the vanadium and niobium contents shall not exceed 0.03 %.
S9.5 Based upon heat analysis in mass percent, the sum of the nickel and copper contents shall not exceed 0.15 %.
S9.6 Based upon heat analysis in mass percent, the carbon content shall not be less than 0.18 %.
S9.7 Welding consumables of repair welds shall be of low hydrogen type. E60XX electrodes shall not be used and the resultant weld chemical composition shall meet the chemical composition requirements specified for the pipe.
S9.8 The designation “HF-N” shall be stamped or marked on each pipe to signify that the pipe complies with this supplementary requirement.
Orders for material under this specification should include the following, as required, to describe the desired material adequately:
|Quantity||Feet, centimeters, or number of lengths|
|Name of material||Seamless or Welded Pipe|
|Grade||Grade A, Grade B, or Grade C|
|Manufacture||ot-finished or cold-drawn|
|Size||NPS or Outside Diameter and Schedule Number of Average Wall Thickness|
|Special outside diameter tolerance pipe|
|Inside diameter tolerance pipe, over 10 in ID|
|Length||Specific or random|
|Test Report Required|
A106 GRADE C PIPES PRICE
|Country Name||Latest Price/ Recent Updated Price 2017-18|
|A106 GRADE C Pipe Price in Indonesia||US $850 - 950 / Metric Ton|
|A106 GRADE C Pipe Price in Malaysia||US $850 - 990 / Metric Ton|
|A106 GRADE C Pipe Price in United Arab Emirates||AED 3121.84 - 3489.11/ Metric Ton|
|A106 GRADE C Pipe Price in Singapore||US $850 - 995 / Metric Ton|
|A106 GRADE C Pipe Price in Iran||US $850 - 950 / Metric Ton|
|A106 GRADE C Pipe Price in South Korea||US $850 - 1350 / Metric Ton|
|A106 GRADE C Pipe Price in Egypt||US $850 - 1150 / Metric Ton|
|A106 GRADE C Pipe Price in Saudi Arabia||US $850 - 950 / Metric Ton|
|A106 GRADE C Pipe Price in Kuwait||US $850 - 950 / Metric Ton|
|A106 GRADE C Pipe Price in South Africa||US $850 - 1100 / Metric Ton|
|A106 GRADE C Pipe Price in Qatar||US $850 - 950 / Metric Ton|
|A106 GRADE C Pipe Price in Bahrain||BD 320-358 / Metric Ton|
|A106 GRADE C Pipe Price in Oman||US $850 - 950 / Metric Ton|
|A106 GRADE C Pipe Price in India||INR 56988-63692/ Metric Ton|
|A106 GRADE C Pipe Price in Taiwan||US $850 - 950 / Metric Ton|
|A106 GRADE C Pipe Price in Vietnam||US $850 - 1250 / Metric Ton|
|A106 GRADE C Pipe Price in USA||US $850 - 1050 / Metric Ton|
*ASTM A 106 grade B Seamless Pressure Pipe
B) Unless otherwise specified by the purchaser, for each reduction of 0.01 % below the specified carbon maximum, an increase of 0.06 % manganese above the specified maximum will be permitted up to a maximum of 1.65 %.
*ASME SA 106 grade B Seamless Pressure Pipe
B) For each reduction of 0.01 % below the specified carbon maximum, an increase of 0.06 % manganese above the specified maximum will be permitted up to a maximum of 1.35 %.
WE MAINLY STOCK & SUPPLY THE ASTM A106 GRADE C CARBON STEEL SEAMLESS PIPES OF FOLLOWING MAKE:
astm a106 grade C Carbon Steel Seamless PipeS Sizes Available in Stock with Price
SUPPLYING ASTM a106 grade C CARBON STEEL SEAMLESS PIPES TO COUNTRIES -
We Export ASTM A106 Grade C Pipe to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen , Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc
Panch Ratna Extrusion is a well known worldwide Exporter of ASTM A106 Grade C Pipes, Panch Ratna Extrusion. is committed to provide each and every customer with the highest standard of customer service. We deals in ASTM A106 Grade C Pipe in India and Overseas, offering a wide range of ASTM A106 Grade C Pipes